KT LCD8H Display Manual

35 Amp Controller and Display BGB Suggested Settings

KT LCD5 Display Manual

LCD M5 Display Manual

 

Setting Suggested Value Purpose
P01 3 Backlight level – darkest level 1, brightest level 3
P02 1 Mileage unit – 0: KM; 1: MILE;
P03 48 Voltage
P04 10 Sleep mode timeout time
P05 0 – 5 Assist levels 0 = 0-3 | 1 = 0-5 | 2 = 0-9
P06 Wheel Diameter inches (include the tyre!)
P07 DO NOT CHANGE Speed sensor magnets *DO NOT CHANGE*
P08 100 Max speed limit
P09 0 Zero start. 1=motor won’t kick in until after 6km/h
P10 2 0 = No Throttle | 1 = Only Throttle | 2 = Both
P11 1 Pedal-assist sensitivity 1 = Assist Starts little rotation    24 = Assist Starts after more rotation
P12 1 Pedal Assist Start intensity 1=Low 3=High
P13 12 Pedal-assist magnet number
P14 20 Max Peak Amp, Reduce for lower power. Do not increase
P15 39 *DO NOT CHANGE* Lower Voltage Cutoff
P16 ODO Reset, Hold up and down for 6 sec to reset
P17 0 *DO NOT CHANGE*